Used on Croft and Keller sliding screen doors. 1/4"W x 3/8"Dia flat nylon ball bearing wheel with 3/8" threaded hex hub. Includes 2 rollers and 2 fasteners.
Plastic roller with narrow center groove 7/32"W nylon wheel, concave edge. Includes a 8-32 x 3/8" machine screw with binder post nut. Fits on Air Control doors.
1/4"W center groove nylon wheel, high tension 2-1/2"L heat-treated steel spring, and No.8 x 3/8" Phillips pan head sheet metal screw.
Consists of 1/4"W center groove wheel, Heat treated, high tension adjustable steel M-spring. Used by several patio door manufacturers.
Bent spring design used by Academy Mfg. and others. Center grooved 5/16"W wheel, 2-1/4"L x 5/16"W flat high-tension heat-treated steel spring, and No.8 x 3/8" Phillips sheet metal screw.
Used by Metal Industries. Center grooved, 1/4"W, roller. 1-3/4"L, high-tension, heat-treated steel spring. Includes No.8 x 3/8" Phillips sheet metal screw.
Non-handed, surface mount, economy pulls, plastic assembly. Contents: 1 black inside pull, 1 black outside pull, #4 8x3/8" Phillips flat head sheet metal screws. 1-7/8"W x 4"H.
Used by several patio door manufacturers. Screw slots allow for vertical adjustments. 7/32"W x 1-3/16"H (not including strike hook). Includes 2 diecast strikes and installation screws.
Used by several patio door manufacturers. Consists of 1/4"W center groove wheel, high-tension heat-treated steel v-spring (2"L before and 2"L after bend).
Used as top and bottom roller by several patio door manufacturers. Consists of 1/4"W center groove nylon wheel, 2"L x 3/8"W steel housing, high-tension heat-treated steel spring.
Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.
Used as top and bottom roller. Plastic wheel with center groove. 1-7/8"L housing, heat treated, high tension steel spring, and No.8-32 x 1-1/4" Phillips pan head screw.
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet, and installation screws. 2-1/8"W x 4-1/4"H handles, 3-5/8" CTC.
Non-handed; mortise installation; used by several door manufacturers. Includes 1 plastic inside and outside pull, 1 steel latch assembly, 1 plastic activator, 1 pop rivet, and installation screws.
Flush mount fits into door stile. 1/16" projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1" to 1-1/4" thick doors. 6-1/2" distance between attaching screws.
Used on Peachtree sliding screen doors. All nylon roller assembly consists of center-grooved wheel and 1-5/32"L x 13/16"H x 7/16"D housing. Includes No. 8 x 3/8" Phillips pan head screws.
Flap has tear strips to adjust width from 3/4" to 1-3/8". Flexible, seals against insects.
Used by Crossly and other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/16"L x 1-1/8"H x 11/16" to 9/16"D die-cast housing assembly with 15/16" flare width.
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8"L x 1-3/8"H x 3/4"D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
For sliding glass doors. Center grooved, 5/16"W steel ball bearing roller and steel inner race with 1/4"-20 x 3/4" carriage bolt and 1/4"-20 hex nut.
Used on Peachtree patio doors. Steel ball bearing roller, adjustable steel housing 2-1/4" L x 1-9/16" H x 17/8" W. Contents: 1 Roller assembly.
Steel ball bearing roller and adjustable steel housing assembly. Used by several patio door manufacturers.
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
Replacement handle for interior patio doors. Includes fasteners for easy installation. Aluminum finish and wood handle.
Stainless Steel track cap used to repair worn or damaged sliding glass door aluminum tracks, and can also be used on horizontal sliding window tracks.
Steel Glass Door Roller. Housing Width: 3/4". Roller Edge Type: Concave. Contents: 1 roller assembly.
Designed for use with model V1195 latch set. Oak handle and screws included. 6-1/2" distance between attaching screws.
Black diecast supports w/wood handle. Mounting posts come finished in black colored paint, and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2? to 6-5/8? center-2-center. Surface mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.